Dinosaur Teeth & Fossils

A Quality Ankylosaurus osteoderm (bony armor plate) from the late Cretaceous of northern North America. Ankylosaurus magniventris was the largest Ankylosaur which grew to 30 feet and 17000 pounds, and a body covered with this bony armor. A complete body osteoderm plate from a juvenile Ankylosaurus. The bone is excellent quality with excellent color and patina with some stream erosion. No cracks or restoration. Legally collected on private land in the Hell Creek Fm., Carter Co., Montana. Authenticity guaranteed. A collector's quality Ankylosaur osteoderm. 

DK33         SIZE: 1-1/4"  x  1"

Note - Adding 16 new Ankylosaur - Nodosaur fossils in January 2023.       Link to Ankylosaur fossils catalog.

A Large, Top Qaulity Edmontonia rugosidens tooth from the late Cretaceous of northern North America. Edmontonia rugosidens was a large Nodosaur which grew to 20 feet and 6000 pounds. The enamel is very good quality with good color / patina. Very little natural wear. No cracks or restoration. ~76 MYA. Legally collected on private land in the Judith River Fm., Wheatfield Co., Montana. Authenticity guaranteed. A collector's quality Nodosaur tooth. Note - tooth comes with the gem case pictured.

DK20       SIZE: 7/16"  (3/8" Wide)   

Note - Adding 16 new Ankylosaur - Nodosaur fossils in January 2023.       Link to Ankylosaur fossils catalog.

An ULTRA RARE, Top Quality 5-7/8" Tyrannosaurus rex tooth with root. This crown measures 2-1/4" and is root thick (1-1/2"). The crown and root enamel has very good color and patina. Serrations are worn and there is some enamel peel. Tip end is worn round which is very typical with adult Rex teeth. Several cracks in the crown were filled and stabilized. The root has no hydration cracks - incredible quality. You will not find a better quality root! A top quality, massive Rex tooth from an adult T. Rex. T-Rex was the apex during the late Cretaceous with massive teeth capable of crushing its prey. See the detailed description to determine how to tell a real T-Rex tooth! Legally collected on private land in the Hell Creek Fm., Garfield Co., Montana. Authenticity guaranteed. You will rarely see an adult rooted Rex tooth!  Note - Riker frame included.

DT02  BoP        SIZE: 5-7/8"   (1-1/2" W)

An incredible, very rare Carcharodontosaurus Pes (toe) claw from the Kem Kem deposits of Morocco. A massive pes claw - bigger than most. Please note that there are minimal breaks and no restoration. Natural color and surfaces. It is difficult to find a better example without heavy restoration. Proximal end is well preserved. This claw is 1-5/8" wide and 1-1/4" thick. This claw is big & fat, and much better quality than most. No restoration. Remember if it looks too good, it is probably a fake! A very rare dinosaur claw! A fantastic opportunity to own a very rare, large Cretaceous theropod claw for less than $1000. The real deal! Authenticity guaranteed.

M1208 BoP      Size: 3-1/2"

An ultra rare Big, Top Quality Tyrannosaurus rex tooth from a large adult Rex. A July 2020 Fossil of the Month. This stocky Rex crown measures 3-5/8" (straight line) and is thick for its size (1-1/4"). The enamel is highest quality. Great rich dark chocolate brown and black color. Excellent serrations on the anterior and posterior serrations. Note - There is no wear facet at the tip and this tooth is serrated to the tip (a recently erupted BIG tooth - rare). One partial hydration crack which was stabilized. No breaks. No repair or restoration. A 100% natural tooth! Fantastic overall condition with incredible serrations for a large Rex tooth. A fantastic collector's tooth!  T-Rex was the apex during the late Cretaceous with massive teeth capable of crushing its prey. See the detailed description to determine how to tell a real T-Rex tooth! Legally collected on privately deeded land in the Hell Creek Fm., Garfield River Co., Montana. Authenticity guaranteed.  Note - a Riker frame is included. This is the best BIG tooth that I have offered. They do not get better than this one. The ultimate high end BIG Rex collector's tooth. Best of the BEST.

DT02 BoP         SIZE: 3-5/8"   (1-1/4" W x 7/8" H)

Note - Adding 2 T. rex teeth in July 2020. Link to T. rex teeth --> T. rex teeth

A rare, Top Quality Anzu wyliei toe (pes) claw from the Hell Creek Fm. of SE Montana. Anzu is referred to as the "Chicken from Hell". An excellent pes claw. Excellent rich brown color and patina. This specimen has excellent perservation - no pitting, nicks or wear. Note - the tip was professsionally restored which is typical for most Hell Creek claws. A high quality, collector's claw from the Hell Creek of Montana. Found in 2014 in one my favorite sites. Note - 2014 Anzu wyliei description paper attached below. Check out our selection of top quality Anzu wyleii claws! Legally collected on private land in the Hell Creek Fm., Powder River Co., Montana. Authenticity guaranteed. Museum Quality.  Note - a Riker frame will be included.

DA08       Size: 1-3/8" (straightline)    On HOLD

Note - Adding five Anzu wyliei claws in July 2020.      Link to Anzu wyliei claws.

An Ultra Rare, rooted Top Quality Allosaurus fragilis tooth measuring 3-3/8". This Allosaurus crown measures 1-1/2" and is wide for its size (5/8"). The enamel is high quality. Great rich brown color. Very good serrations on both sides all the way to the wear facet. Very good serrations for a large tooth. Two cracks was stabilizied. A little repair was done on the narrowest section of the root. Excellent overall condition with very good serrations. An excellent quality tooth! Allosuarus was the apex during the late Jurassic with large teeth designed to slash predators. Legally collected on private land in the Morrison Fm., Moffat Co., Colorado. Authenticity guaranteed.  Note - a Riker case display is included. This is a special rooted Allosaurus tooth!

DL01  BoP        SIZE: 3-3/8"   (15/16" x 5/8" cross section of root)

Note - Adding 8 Allosaurus teeth in July 2020    Link to Allosaurus teeth

A LARGE, Top Quality Edmontosaurus annectens toe from the late Cretaceous of North America. Edmontosaurus is a very large hadrosaur or "duck-bill" dinosaur found in the Hell Creek formation. This is a non-associated set of toe bones from the outer toe (toe IV - see diagram), and it consists of four four toe bones (Phalanx 1 thru 4) and a pes hoof core (ungual). Bone quality is excellent with minor crack fill on Phalanx 1 & 2 only. Other pieces are perfect including an exceptional pes ungual. No restoration. Legally collected on private land in the Hell Creek Fm., Carter & Garfield Co., Montana. An exceptional collector's quality Edmontosaurus toe.  Authenticity guaranteed.

DH41 BoP    SIZE: 12-1/4" (combined length) ; Phalanx #1 3-7/8" x 5" ; Pes Ungual 3-3/4" x 3-1/2"

Note - Adding 4 Edmontosaurus toes / claws in August 2020.       Link to Edmontosaurus fossils catalog

A Top Quality Edmontosaurus annectens lower jaw section from the late Cretaceous of North America. An August Fossil of the Month. Edmontosaurus is a very large hadrosaur or "duck-bill" dinosaur found in the Hell Creek formation. They possessed ~300 teeth that were in columns of five teeth each which acted as conveyor belt to maintain a large chewing surface to cut and grind their food. This specimen is a large section of the lower jaw showing at least 20 teeth still in place. Bone quality is excellent with no cracks. No restoration. Legally collected on private land in the Hell Creek Fm., Powder River Co., Montana. A exceptional specimen from one of my favorite localities. An exceptional collector's quality Edmontosaurus jaw section.  Authenticity guaranteed.

DH31 BoP       SIZE: 4-1/4" x 2-5/8"    

Note - Adding 6 Edmontosaurus jaw sections in August 2020.       Link to Edmontosaurus fossils catalog

A Top Quality, Rare Pachychephalosaurus wyomingensis node cluster from the late Cretaceous of northern North America. An August Fossil of the Month. Pachychephalosaurus is the dinosaur which is famous for its large domed head surrounded by these spikes and nodes (2+ nodes). This spike has excellent color / patina with exceptional surface articulation. The blood grooves are still present in the bone. It is a complete specimen with no cracks or breaks. This is a node cluster with a large node surrounded by a group of small nodes. Note -  the excellent articulated skull surface on the base of the node. Legally collected on private land in the Hell Creek Fm., Powder River Co., Montana. An excellent and very rare collector's quality Pachychephalosaurus node cluster. You don't see these skull pieces very often. No repair or restoration. Authenticity guaranteed. A very special piece - my best cluster!

DP33  BoP     SIZE: 2" H  (Base: 1-7/8"  x  1-3/8")

Note - Adding 6 new Pachy spikes / nodes in August 2020.       Link to Pachy fossils catalog

A Top Quality Tyrannosaurus rex Premaxillary (front) tooth from a big T. Rex. An October 2020 Fossil of the Month. This Rex crown measures 2-1/4" (straight line) and 1" thick. The enamel is the highest quality with no root etchings. Great dark chocolate brown color. Excellent serrations serrations. The tip is excellent with a small natural wear facet. No cracks. No breaks. A 100% natural tooth! A fantastic Premax Rex tooth!  T-Rex was the apex during the late Cretaceous with massive teeth capable of crushing its prey. See the detailed description to determine how to tell a real T-Rex tooth! Legally collected on privately deeded land in the Hell Creek Fm., Carter River Co., Montana. Authenticity guaranteed.  Note - a Riker frame is included. This is a top quality collector's tooth. Museum quality.

DT02 BoP3         SIZE: 2-1/4"   (1" W x 3/4" H)

Note - Adding 3 T. rex teeth in October 2020.  Link to T. rex teeth --> T. rex teeth

A TOP QUALITY, EXTRA LARGE Nanotyrannus lancensis tooth from the western US. This tooth measures 2-1/4" (straight line). The enamel is exceptional with incredible color and quality. Excellent serrations. A very small tip wear facet. Wide base with a typical Nano pinched oval cross-section. No cracks. No repair or restoration. Legally collected on private land in the Hell Creek Fm., Carter Co., Montana. Authenticity guaranteed.  A fantastic collector's BIG Nano tooth.  Note - a Riker type frame is included. Museum Quality. A monster sized, top qulaity Nano tooth. One of the finest that I have seen!

DN01 BoP2       SIZE: 2-1/4"  (13/16" W)

Note - Adding 16 Nanotyrannus teeth in October 2020  ->  Link to Nano Teeth