Search results for: 'dinosaur teeth from morocco mosses'

A Top Quality, Triceratops horridus brow horn from the late Cretaceous of northern North America. A February 2021 Fossil of the Month. Triceratops was a large ceratopsian dinosaur found in the Hell Creek and Lance Creek formations. This is a special horn with exceptional detail preserved and exceptional color / patina. You can see all of the natural blood grooves around the surface of the horn. The preparation of the horn was fairly basic and simple - some cracks filled and a small area around the tip was restored. This is very minimal restoration for a horn. It comes with the welded steel stand as shown. A fantastic fossil overall. Legally collected on private land in the Lance Creek Fm., Lusk, Wyoming. Authenticity guaranteed. Certification of Authentication provided. Museum quality. A fantastic Triceratops brow horn display. You don't see these top quality horns very often! A great display size. Shipping weight is ~15 lbs. Note - International buyers may incur some shipping cost.            

DC51 BoP        SIZE: 19" (straight line) ; Distal end measures 6" Height x 4" Wide       

Note - Adding 30 new Triceratops fossils in February 2021.       Link to Triceratops fossils catalog

A Top Quality Triceratops horridus nasal horn section from the late Cretaceous of northern North America. A September Fossil of the Month. Triceratops was a large ceratopsian dinosaur found in the Hell Creek and Lance Creek formations which is know for three horns and the large frill protecting its neck. A complete nasal horn. This is an exceptional nasal horn with excellent detail preserved. You can see all of the natural blood grooves around the surface of the horn and the skull bone is attached to the rear of the horn. There is mall amount of crack fill. No restoration. 100% natural specimen. It comes with a sturdy custom steel stand as shown. A fantastic fossil overall for display. Legally collected on private land in Corson Co., So. Dakota. Authenticity guaranteed. Certification of Authentication provided. A excellent nasal norn. This is a rare opportunity to own a very special horn. This is a special high end Triceratops horn.      

DC52         SIZE: 6-1/2" Long x  4-3/8"  High;   Height on stand: 6-1/2"

Note - Adding 15 new Triceratops bones in September 2025.       Link to Triceratops fossils catalog

A rare Top Quality Triceratops horridus caudal vertebra from the late Cretaceous of northern North America. A November Fossil of the Month. Triceratops was a large ceratopsian dinosaur found in the Hell Creek formation which is known for three horns and a large frill protecting its neck. This is a caudal (tail) vertebra with exceptional detail preserved with great color and patina. You can see the vertebra surface is very rugous and the vertebra is very thick with a very round centra which are characteristics of Triceratops and distinguishes it from a Hadrosaur. Triceratops bones are more difficult to find. Please note that the left transverse porcess and the spinous process were professionally restored. This is now specimen compete. It is extremely rare to find vertebra that are complete. Legally collected on private land in Powder River Co., Montana. It comes with the custom steel stand as shown. A fantastic fossil overall for display. Authenticity guaranteed. An excellent big Triceratops vertebra. Note - International buyers will incur shipping cost. Weighs 3.7 pounds with stand.

DC31         SIZE: 9" Height x 10" Wide x 2-1/2" Length  ;  Height on stand =  12"

Note - Adding 14 new Triceratops bones in November 2024.       Link to Triceratops fossils catalog

An Ultra Rare, Top Quality Onchopristis dunklei rostal tooth from the Kem Kem area of Morocco. Onchopristis dunklei was a smaller Cretaceous Saw shark which had teeth with three barbs. No repair or restoration. Authenticity guaranteed. This Saw shark species is rarely seen in Morocco. 

M1033 BoP        SIZE: 1-1/16"

Note – Adding 12 new Onchopristis teeth added in December 2019.  ->  Link to Onchopristis Catalog

A LARGE, Top Quality Edmontosaurus annectens tail (caudal) vertebra from the late Cretaceous of North America. Edmontosaurus is a very large hadrosaur or "duck-bill" dinosaur found in the Hell Creek formation. Very good bone quality and color. The vertebra is very complete with both processes and a good section of the neural arch with a well defined neural notch remains. Very good bone preservation. Basic crack fill on the two processes which is to be expected. No repair or restoration. Legally collected on private land in the Hell Creek Fm., Carter Co., Montana. An excellent collector's quality Edmontosaurus vertebra.  Authenticity guaranteed. Note - This items weighs 2.5 pounds and an international shipping surcharge will be applied to the "free shipping" offer.

DH53 BoP        SIZE: 7" (wide) x 6-3/4" (height)  x 3-1/2" (length)

Note - Adding 12 Edmontosaurus bones / claws in August 2021.       Link to Edmontosaurus fossils catalog

A GEM XL Carcharodontosaurus tooth. Gorgeous deep RED color! Highest quality enamel with an incredible red patina. Exceptional quality and preservation. Excellent anterior and posterior serrations. Excellent growth waves near cutting edge. Largest position tooth in jaw - extra wide crown. No cracks! Museum Quality. EXTRA LARGE tooth. We have our best selection of top quality Charcharodontosaur teeth in years. Check them out!

M1201      Size: 3-3/4"   (1-5/8" W x 3/4" T)

A Top Quality, Triceratops horridus brow horn section from the late Cretaceous of northern North America. A November Fossil of the Month. Triceratops was a large ceratopsian dinosaur found in the Hell Creek Formation. This is a special horn with exceptional detail preserved with excellent color and natural patina. Incredible surface articulation. You can see all of the natural blood grooves around the surface of the horn. The preparation of the horn was very basic with one crack repair. No extensive repair or restoration. It comes with the custom steel stand as shown. A fantastic fossil overall for display. Legally collected on private land in the Hell Creek Fm., Dewey Co., So. Dakota. Authenticity guaranteed. Certification of Authentication provided. Museum quality specimen. A fantastic Triceratops brow horn display. You don't see these top quality horns very often. This one is much better quality than the typical brow horn section and a great display size!  Note - International buyers will incur shipping cost.  Weighs 5.2 pounds with stand. Have you been waiting for a special Triceratops horn display?  This is a fantastic Triceratops horn display.      

DC51   SIZE: 8-1/2"length ; End: 3-1/2" wide ;  (8-3/4" height on stand)

Note - Adding 14 new Triceratops bones in November 2024.       Link to Triceratops fossils catalog

A Top Quality Richardoestesia isosceles tooth from Montana. A theropod from the Troodonidae family. These teeth are straight, flat, and possess ultra-fine serrations that run the length of the crown and may be related to Paronychodon (see beow). No cracks. No repair or restoration. Legally collected on private land in the Hell Creek Fm., Powder River Co., Montana. Authenticity guaranteed. 

DF12       Size: 5/16"

Note - Adding 12 new Richardoestesia teeth in June 2024      Link to Richardoestesia catalog.

A High Quality Richardoestesia isosceles tooth from Montana. A theropod from the Troodonidae family. These teeth are straight, flat, and possess ultra-fine serrations that run the length of the crown and may be related to Paronychodon (see beow). No cracks. No repair or restoration. Legally collected on private land in the Hell Creek Fm., Powder River Co., Montana. Authenticity guaranteed. 

DF10       Size: 3/8"

Note - Adding 12 new Richardoestesia teeth in June 2024      Link to Richardoestesia catalog.

A High Quality Richardoestesia isosceles tooth from Montana. A theropod from the Troodonidae family. These teeth are straight, flat, and possess ultra-fine serrations that run the length of the crown and may be related to Paronychodon (see beow). No cracks. No repair or restoration. Legally collected on private land in the Hell Creek Fm., Powder River Co., Montana. Authenticity guaranteed. 

DF09       Size: 3/8"+

Note - Adding 12 new Richardoestesia teeth in June 2024      Link to Richardoestesia catalog.

A High Quality Richardoestesia isosceles tooth from Montana. A theropod from the Troodonidae family. These teeth are straight, flat, and possess ultra-fine serrations that run the length of the crown and may be related to Paronychodon (see beow). No cracks. No repair or restoration. Legally collected on private land in the Hell Creek Fm., Powder River Co., Montana. Authenticity guaranteed. 

DF08       Size: 1/2"

Note - Adding 12 new Richardoestesia teeth in June 2024      Link to Richardoestesia catalog.

A Top Quality Richardoestesia isosceles tooth from Montana. A theropod from the Troodonidae family. These teeth are straight, flat, and possess ultra-fine serrations that run the length of the crown and may be related to Paronychodon (see beow). No cracks. No repair or restoration. Legally collected on private land in the Hell Creek Fm., Powder River Co., Montana. Authenticity guaranteed. 

DF07       Size: 9/16"

Note - Adding 12 new Richardoestesia teeth in June 2024      Link to Richardoestesia catalog.