Search results for: 'fossil dinosaur frame alberta'

An EXTRA LARGE, RARE Spinosaurus aegyptiacus hand (manus) claw from the Kem Kem region of Morocco. An very good manus claw with good color and patina. Note - This claw had some breaks along the bottom of the claw and at the back end of the claw. So there is some repair and restoration to reassemble the claw.  A good quality, collector's claw. Authenticity guaranteed.  Note - a Riker frame will be included. I do not see quality Spinosaurus claws very often and this is a big one. Spinosaurus claws of this size are quite rare!  

M1250d      Size: 6-5/8"  (straightline)  ;  7-1/16" (curve) ; 1-3/4" (proximal end height)

Note - Adding 4 top quality Spinosaurus manus claws in October 2025   ->  Link to Spinosaurus fossils

A rare, Top Quality Brachylophosaurus  tail ungual (toe claw) from the late Cretaceous (Judith River Fm.) of North America. Brachylophosaurus is a mid-sized hadrosaur or "duck-bill" dinosaur found in the Judth River formation. Bone quality is excellent. Note - the distinctive ventral ridge is located on the base of the ungual. One crack. No restoration. Legally collected on private land in the Judith River Fm., Hill Co., Montana. An excellent collector's quality Brachylophosaurus ungual.  Authenticity guaranteed. A rare item.

DH73       1-3/4" (wide) & 1-13/16" (length)

Note - Adding 22 Hadrosaur bones / claws in April 2024.       Link to Edmontosaurus fossils catalog

A Top Quality Edmontosaurus annectens tail (caudal) vertebra from the late Cretaceous of North America. Edmontosaurus is a very large hadrosaur or "duck-bill" dinosaur found in the Hell Creek formation. Bone quality is excellent. Partial process is intact. No cracks. No repair or restoration. Legally collected on private land in the Hell Creek Fm., Harding Co., So. Dakota. An excellent collector's quality Edmontosaurus vertebra.  Authenticity guaranteed. 

DH65        SIZE: 1-1/4" (height) x 1-1/4" (centrum wide) & 1-1/8" (length)

Note - Adding 21 Edmontosaurus bones / claws in May 2025.       Link to Edmontosaurus fossils catalog

A Top Quality Edmontosaurus annectens tail (caudal) vertebra from the late Cretaceous of North America. Edmontosaurus is a very large hadrosaur or "duck-bill" dinosaur found in the Hell Creek formation. Bone quality is excellent. Partial process is intact. No cracks. No repair or restoration. Legally collected on private land in the Hell Creek Fm., Harding Co., So. Dakota. An excellent collector's quality Edmontosaurus vertebra.  Authenticity guaranteed. 

DH63        SIZE: 1-3/8" (height) x 1-1/8" (centrum wide) & 1-1/8" (length)

Note - Adding 21 Edmontosaurus bones / claws in May 2025.       Link to Edmontosaurus fossils catalog

A five associated, Top Quality Edmontosaurus annectens tail (caudal) vertebrae from the late Cretaceous of North America. Edmontosaurus is a very large hadrosaur or "duck-bill" dinosaur found in the Hell Creek formation. Bone quality is excellent. Partial process is intact. No cracks. No repair or restoration. Legally collected on private land in the Hell Creek Fm., Harding Co., So. Dakota. An excellent collector's quality Edmontosaurus vertebra.  Authenticity guaranteed. 

DH61        SIZE: 1-1/4" (height) x 1-1/4" (centrum wide) & 4-7/8" (length)

Note - Adding 21 Edmontosaurus bones / claws in May 2025.       Link to Edmontosaurus fossils catalog

A Top Quality Edmontosaurus annectens toe from the late Cretaceous of North America. Edmontosaurus is a very large hadrosaur or "duck-bill" dinosaur found in the Hell Creek formation. This three piece toe is #2. Some crack fill. No repair or restoration. Legally collected on private land in the Hell Creek Fm., Harding Co., So. Dakota. An excellent collector's quality Edmontosaurus toe.  Authenticity guaranteed.  Note - this toe weighs 3 lbs and international customers will pay a supplemental shipping charge.

DH42        SIZE: 10-5/8" (length)  3-7/8" (width)

Note - Adding 21Edmontosaurus bones / claws in May 2025.       Link to Edmontosaurus fossils catalog

A LARGE, High Quality Edmontosaurus annectens lower jaw (dentary) section from the late Cretaceous of North America. Edmontosaurus is a very large hadrosaur or "duck-bill" dinosaur found in the Lance Creek formation. A large dentary section showing 25 "conveyor tracks" that held their lower jaw teeth. Crack fill. Legally collected on private land in the Lance Creek Fm., Niobrara Co., Wyoming. An excellent collector's quality Edmontosaurus dentary section.  Authenticity guaranteed. Note - item weighs 4.75 lbs and international customers will pay a shipping supplement. 

DH32        SIZE: 13" (length)  6" (height)

Note - Adding 21Edmontosaurus bones / claws in May 2025.       Link to Edmontosaurus fossils catalog

A Top Quality Carcharodontosaurus saharicus tooth from the Kem Kem deposits of Morocco. An excellent red colored tooth. High quality enamel. Excellent preservation. Excellent anterior and posterior serrations. Serrated to the tip. An excellent tip. No cracks. No repair or restoration. A Top Quality collector's tooth. Authenticity Guaranteed. An exceptional Carch tooth!  A floating frame display case is included.

M1227       Size: 1-1/8"   

Note - Added 10 new Carchardontosaurus teeth in October 2024.   Link to Carcharodontosaurus teeth.

A Top Quality Carcharodontosaurus saharicus tooth from the Kem Kem deposits of Morocco. An excellent red colored tooth. High quality enamel. Excellent preservation. Excellent anterior and posterior serrations. Serrated to the tip. An excellent tip. No cracks. No repair or restoration. A Top Quality collector's tooth. Authenticity Guaranteed. An exceptional Carch tooth!  A floating frame display case is included.

M1222        Size: 1-11/16"   (1" wide)

Note - Added 10 new Carchardontosaurus teeth in October 2024.   Link to Carcharodontosaurus teeth.

A Top Quality, Triceratops horridus brow horn from the late Cretaceous of northern North America. A February 2021 Fossil of the Month. Triceratops was a large ceratopsian dinosaur found in the Hell Creek and Lance Creek formations. This is a special horn with exceptional detail preserved and exceptional color / patina. You can see all of the natural blood grooves around the surface of the horn. The preparation of the horn was fairly basic and simple - some cracks filled and a small area around the tip was restored. This is very minimal restoration for a horn. It comes with the welded steel stand as shown. A fantastic fossil overall. Legally collected on private land in the Lance Creek Fm., Lusk, Wyoming. Authenticity guaranteed. Certification of Authentication provided. Museum quality. A fantastic Triceratops brow horn display. You don't see these top quality horns very often! A great display size. Shipping weight is ~15 lbs. Note - International buyers may incur some shipping cost.            

DC51 BoP        SIZE: 19" (straight line) ; Distal end measures 6" Height x 4" Wide       

Note - Adding 30 new Triceratops fossils in February 2021.       Link to Triceratops fossils catalog

A GEM Quality, Colorful Tyrannosaur tooth from the late Cretaceous (Campanian) in northern North America. Please note that this tooth could Gorgosaurus or Daspletosaurus - see Detailed Discussion below. An October Fossil of the Month. This tooth measures 1-1/2" - an excellent Tyrannosaur  tooth. A maxillary tooth. The enamel is highest quality with exceptional color. Anterior serrations and posterior serrations are excellent. No repair or restoration. Legally collected on private land in the Judith River Fm., Blaine Co., Montana. Authenticity guaranteed. An incredible collector's tooth. A Riker display case is included.

DY13         SIZE: 1-1/2"   (Base: 5/8" wide)

Note - Added 26 new Tyrannosaur teeth in October 2025.     Link to Tyrannosaur teeth catalog.

A Top Quality, Triceratops horridus tooth from the late Cretaceous of western North America. A maxillary (upper jaw) tooth. Triceratops is a large ceratopsian dinosaur found in the Hell Creek formation. The enamel is high quality with nice color / patina. The chewing surface measures 11/16”. This tooth has normal tip wear. The root surface is very gnarly.  No cracks. No restoration. Legally collected on private land in the Hell Creek Fm., Carter Co., Montana. Note - this tooth comes with a gem jar display. Authenticity guaranteed. An excellent Triceratops tooth! 

DC13         SIZE: 1-3/16"         

Note - Adding 18 new Triceratops teeth in June 2022.       Link to Triceratops fossils catalog