Search results for: 'cr02 frame t re'

An Ultra Rare, GEM QUALITY Spinosaurus aegyptiacus hand (manus) claw from the Kem Kem region of Morocco. An October Fossil of the Month.  An excellent manus claw with excellent red color and patina. The surface quality is exceptional with no pitting, nicks or little wear! Great patina. Fully inflated. The articulated end is complete. One crack. No restoration. An exceptional quality, collector's claw. Authenticity guaranteed.  Note - a Riker frame will be included. I do not see fine quality Spinosaurus claws very often and this is the best I have seen for several years. This is what a real Spinosaurus claw looks like. Spinosaurus claws with this quality are quite rare!   On HOLD

M1249      Size: 4-7/16"  (straightline)  ;  4-3/4" (curve) ; 1-1/4" (proximal end height)

Note - Adding two top quality Spinosaurus manus claws in January 2025   ->  Link to Spinosaurus fossils

A TOP QUALITY, EXTRA LARGE & very rare Archaeocete whale, Zygorhiza kochii, from Harleyville, So. Carolina. Our 2nd November Fossil of the Month is a highly desirable Zygorhiza molar or "yoke" tooth.  An exceptional chocolate brown colored crown and tan root. The crown has fantastic articulation with incredible detail. Complete root. This tooth has minimal repair to tips of the 3 cusps on the left side only. Very little repair overall for a yoke tooth which are typically heavily repaired.  One of the BEST Archaeocete molars that I have seen from So. Carolina in a long time. A very rare collector's tooth. Museum Quality.  Note - 6" x 8" Riker frame included. One of my favorites!

SC1322        SIZE: 3-3/4"

Note - 14 new Archaeocete whale teeth from So. Carolina added in November 2017. Our largest selection of top quality Archaeocete teeth ever!                     Archaeocete Whale catalog link.

A rare, Top Quality Triceratops horridus rooted tooth from the late Cretaceous of northern North America. Another July 2018 Fossil of the Month. Triceratops is a large ceratopsian dinosaur found in the Hell Creek formation. The enamel is excellent quality with excellent color / patina. Extra large root which is quite rare. Incredible preservation of the crown and root that shows their intricate detail. The chewing surface measures 1-1/14” with a very high ridge. This is a recently erupted tooth that has slight tip wear. No cracks or restoration. A rare rooted, extra large Triceratops tooth! Legally collected on private land in the Hell Creek Fm., Carter Co., Montana. An excellent collector's quality Triceratops tooth. Note - tooth comes with a Riker type frame. Authenticity guaranteed. My largest and best triceratops tooth!

DC01 BoP      SIZE: 2-1/4"         

Note - Adding new Triceratops fossils in July 2018.       Link to Triceratops fossils catalog

A rare, Top Quality Anzu wyliei toe (pes) claw from the Hell Creek Fm. of SE Montana. Anzu is referred to as the "Chicken from Hell". An excellent pes claw. Excellent rich brown color and patina. This specimen has excellent perservation - no pitting, nicks or wear. Note - the tip was professsionally restored which is typical for most Hell Creek claws. A high quality, collector's claw from the Hell Creek of Montana. Found in 2014 in one my favorite sites. Note - 2014 Anzu wyliei description paper attached below. Check out our selection of top quality Anzu wyleii claws! Legally collected on private land in the Hell Creek Fm., Powder River Co., Montana. Authenticity guaranteed. Museum Quality.  Note - a Riker frame will be included.

DA08       Size: 1-3/8" (straightline)    On HOLD

Note - Adding five Anzu wyliei claws in July 2020.      Link to Anzu wyliei claws.

A very rare, colorful GEM Quality Tyrannosaurus rex  tooth. This tooth measures 2-1/16".  A June Fossil of the Month. The enamel has an exceptional two-tone color and patina (see Photos #2 & 3).  Incredible natural gloss. Exceptional mesial and distal serrations. Base cross-section is a tall oval. No hydration cracks. A small section on the distal carina is restored. A top quality tooth! T-Rex was the apex during the late Cretaceous with massive teeth capable of crushing its prey. See the detailed description to determine how to tell a real T-Rex tooth!  Legally collected on private land in the Hell Creek Fm., Butte Co., So. Dakota. Authenticity guaranteed. Note - a Riker frame display is included. 

DT12        SIZE: 2-1/16"   (Base: 1" x 9/16")

Note - Adding 16 T. rex teeth in June 2024.    Link to T. rex teeth -->  T. rex teeth

A very rare,Top Quality Anzu wyliei finger from the Hell Creek Fm. of SE Montana. Anzu is referred to as the "Chicken from Hell", a large Hell Creek Fm. oviraptor. This is the 2nd finger with a non-assciated manus claw and digit. The manus claw is GEM quality (flawless). Excellent rich brown color and patina. All surfaces are fantasic - very rare. This is top quality, collector's Anzu finger from the Hell Creek of Montana. Note - 2014 Anzu wyliei description paper attached below. Check out our selection of top quality Anzu wyleii claws! Legally collected on private land in the Hell Creek Fm., Montana. Authenticity guaranteed. Note - a Riker display frame will be included. 

DA24      Claw Size: 1-1/4" (straightline) Powder River Co. ; Digit Size: 1-1/8"  Garfield Co.

Note - Adding 6 Anzu wyliei claws in February.      Link to Anzu wyliei claws.

A very rare,Top Quality Anzu wyliei finger from the Hell Creek Fm. of SE Montana. Anzu is referred to as the "Chicken from Hell", a large Hell Creek Fm. oviraptor. This is the 2nd finger with a non-assciated manus claw and digit. The manus claw is top quality with some crack fill. Excellent rich brown color and patina. All surfaces are fantasic - very rare. This is top quality, collector's Anzu finger from the Hell Creek of Montana. Note - 2014 Anzu wyliei description paper attached below. Check out our selection of top quality Anzu wyleii claws! Legally collected on private land in the Hell Creek Fm., Carter Co., Montana. Authenticity guaranteed. Note - a Riker display frame will be included. 

DA23      Claw Size: 1-7/16" (straightline)  ; Digit Size: 1-13/16"  

Note - Adding 6 Anzu wyliei claws in February.      Link to Anzu wyliei claws.

A Top Quality Tyrannosaur tooth from the late Cretaceous (Campanian) in northern North America. An October Fossil of the Month. Please note that this tooth could Gorgosaurus or Daspletosaurus - see Detailed Discussion below. This tooth measures 2-3/8" - an excellent Tyrannosaur tooth. The enamel is high quality with excellent color. Anterior serrations and posterior serrations are excellent. Serrated to the tip. Note - the top has some minor planting etching and there is one natural wear facet on the side (very typical for the Campanian Tyrannosaurs). No cracks, repair or restoration. Legally collected on private land in the Judith River Fm., McCone Co., Montana. Probably an excellent Gorgosaurus tooth based on size and roundness of the tooth cross-section. Also found at a site that produced a Gorgosaurus skeleton. Authenticity guaranteed. An excellent BIG tooth. A Riker display frame is included.

DY04        SIZE: 2-3/8"  (Base: 7/8" x 5/8")

Note - Added 14 new Tyrannosaur teeth in October 2021.       Link to Tyrannosaur teeth catalog.

A Very Rare, TOP QUALITY Spinosaurus aegyptiacus hand (manus) claw from the Kem Kem region of Morocco. A February Fossil of the Month. An exceptional manus claw with fantastic color. An extra wide and heavy claw. No breaks. Two cracks are stabilized. All original with no filler. Excellent rich tan & red colors. Exceptional surface - no pitting, nicks or wear! Fantastic patina. Fully inflated. No repair or restoration. 100% natural which is extremely rare for a Spinosurus claw. An exceptional quality, collector's claw. One of the finest quality manus claws that I have seen. Check out our selection of top quality Spinosaurus claws! Authenticity guaranteed.  Note - a Riker frame will be included. You do not see fine quality Spinosaurus claws very often. The claws being sold are typically mostly restored and most often very poorly restored specimens. This is what a real Spinosaurus claw looks like! Museum Quality. The Best of the BEST!

M1249 BoP      Size: 4-5/16"  (straightline)  

Link to Spinosaurus fossils

An ULTRA RARE, Top Quality 5-7/8" Tyrannosaurus rex tooth with root. This crown measures 2-1/4" and is root thick (1-1/2"). The crown and root enamel has very good color and patina. Serrations are worn and there is some enamel peel. Tip end is worn round which is very typical with adult Rex teeth. Several cracks in the crown were filled and stabilized. The root has no hydration cracks - incredible quality. You will not find a better quality root! A top quality, massive Rex tooth from an adult T. Rex. T-Rex was the apex during the late Cretaceous with massive teeth capable of crushing its prey. See the detailed description to determine how to tell a real T-Rex tooth! Legally collected on private land in the Hell Creek Fm., Garfield Co., Montana. Authenticity guaranteed. You will rarely see an adult rooted Rex tooth!  Note - Riker frame included.

DT02  BoP        SIZE: 5-7/8"   (1-1/2" W)

A Top Quality Tyrannosaurus rex Premaxillary (front) tooth from a big T. Rex. An October 2020 Fossil of the Month. This Rex crown measures 2-1/4" (straight line) and 1" thick. The enamel is the highest quality with no root etchings. Great dark chocolate brown color. Excellent serrations serrations. The tip is excellent with a small natural wear facet. No cracks. No breaks. A 100% natural tooth! A fantastic Premax Rex tooth!  T-Rex was the apex during the late Cretaceous with massive teeth capable of crushing its prey. See the detailed description to determine how to tell a real T-Rex tooth! Legally collected on privately deeded land in the Hell Creek Fm., Carter River Co., Montana. Authenticity guaranteed.  Note - a Riker frame is included. This is a top quality collector's tooth. Museum quality.

DT02 BoP3         SIZE: 2-1/4"   (1" W x 3/4" H)

Note - Adding 3 T. rex teeth in October 2020.  Link to T. rex teeth --> T. rex teeth

A LARGE, Ultra Rare, GEM QUALITY Spinosaurus aegyptiacus hand (manus) claw from the Kem Kem region of Morocco. A February Fossil of the Month. An exceptional manus claw with fantastic color and patina. A wide and heavy claw. No breaks. The surface is exceptional with no pitting, nicks or wear! The articulated end is complete with an excellent surface. Fully inflated. No repair or restoration. 100% natural which is extremely rare for a Spinosurus claw. An exceptional quality, collector's claw. One of the finest quality manus claws that I have seen in many years. Authenticity guaranteed. Note - a Riker frame will be included. I do not see fine quality Spinosaurus claws very often. Spinosaurus claws with this quality are quite rare!  Museum Quality. The Best of the BEST!  Sorry - No discounts. 

M1250c      Size: ~5"  (straightline) ;   6-3/4" (curve) ;  1-3/4" (proximal end height)

Note - Adding 2 top quality Spinosaurus manus claws in February 2025.  ->   Link to Spinosaurus fossils