Search results for: 'thick claw'

A rare late Jurassic sauropod limb bone section from the Morrison Fm. with bite marks. This is most likely a Camarasaurus tibia end section.  There is a tooth rake and a wedge cut shown in photos #3 & 4. Photo #5 shows a circular puncture of the bone. Camarasaurus was a mid- sized Jurassic sauropod.. Great rich brown gray color. Excellent bone quality. Note - sauropods had hollow bones with air sacs to reduce their weight. Legally collected on private land in the Morrison Fm., Bone Cabin Quarry, Albany Co., Wyoming. Authenticity guaranteed.  Shipping weight is 6 lbs. This item is not eligible for free shipping. A real story bone!

BC06         SIZE:   5-1/2" length  x  6-1/2" wide  x  3-1/2" thick

Note - Adding 10 Jurassic dinosaur limb bones in April 2024.    Link to Sauropod Bones

A Top Quality Hadrosaur maxilla (upper jaw) section from the late Cretaceous (Horseshoe Canyon Fm.) of North America. This jaw section contains 10 exposed teeth. This hadrosaur or "duck-bill" dinosaur was found in the Horseshoe Canyon Formation in Alberta. The maxilla possessed 100s teeth that were in rows of teeth which acted as conveyor belt to maintain a chewing surface to cut and grind their food. This specimen is a section of the lower jaw includes ten rows of teeth. Bone quality is excellent. No restoration. Legally collected on private land in the Horseshoe Canyon Fm., Alberta, Canada. An excellent collector's quality Edmontosaurus maxilla section from a rare location.  Authenticity guaranteed. Disposition number #000028-0000029. 

DH33        SIZE: 4"  x  3-1/2"    

Note - Adding 22 Hadrosaur /Edmontosaurus bones & claws in April 2022.     Link to Edmontosaurus fossils catalog

A Top Quality Edmontosaurus annectens tail (cervical) vertebra from the late Cretaceous of North America. A May Fossil of the Month. Edmontosaurus is a very large hadrosaur or "duck-bill" dinosaur found in the Hell Creek formation. This cervical vertebra is 100% complete without restoration - rare!  Bone quality is excellent. Processes are intact. No cracks. No repair or restoration. Legally collected on private land in the Hell Creek Fm., Carter Co., Montana. An exceptional collector's quality Edmontosaurus vertebra. Authenticity guaranteed. This vertebra comes with a custom steel stand as in the photos. Weighs 3.5 lbs. International customers will need to pay a shipping suplement.

DH53        SIZE: 6-3/4" (height) x 6-3/4" (wide) & 2-3/4" (length)  Height on stand = 9".

Note - Adding 21 Edmontosaurus bones / claws in May 2025.       Link to Edmontosaurus fossils catalog

A LARGE, Top Quality Edmontosaurus annectens toe from the late Cretaceous of North America. Edmontosaurus is a very large hadrosaur or "duck-bill" dinosaur found in the Hell Creek formation. This is a non-associated set of toe bones from the outer toe (toe IV - see diagram), and it consists of four four toe bones (Phalanx 1 thru 4) and a pes hoof core (ungual). Bone quality is excellent with minor crack fill on Phalanx 1 & 2 only. Other pieces are perfect including an exceptional pes ungual. No restoration. Legally collected on private land in the Hell Creek Fm., Carter & Garfield Co., Montana. An exceptional collector's quality Edmontosaurus toe.  Authenticity guaranteed.

DH41 BoP    SIZE: 12-1/4" (combined length) ; Phalanx #1 3-7/8" x 5" ; Pes Ungual 3-3/4" x 3-1/2"

Note - Adding 4 Edmontosaurus toes / claws in August 2020.       Link to Edmontosaurus fossils catalog

A LARGE, Top Quality Edmontosaurus annectens tail (caudal) vertebra from the late Cretaceous of North America. Edmontosaurus is a very large hadrosaur or "duck-bill" dinosaur found in the Hell Creek formation. Very good bone quality and color. The vertebra is very complete with both processes and a good section of the neural arch with a well defined neural notch remains. Very good bone preservation. Basic crack fill on the two processes which is to be expected. No repair or restoration. Legally collected on private land in the Hell Creek Fm., Carter Co., Montana. An excellent collector's quality Edmontosaurus vertebra.  Authenticity guaranteed. Note - This items weighs 2.5 pounds and an international shipping surcharge will be applied to the "free shipping" offer.

DH53 BoP        SIZE: 7" (wide) x 6-3/4" (height)  x 3-1/2" (length)

Note - Adding 12 Edmontosaurus bones / claws in August 2021.       Link to Edmontosaurus fossils catalog

A Top Quality Lambeosaur (Parasaurolophus) maxilla from the late Cretaceous (Judith River Fm.) of North America. An April Fossil of the Month. This is a complete upper jaw containing 100s exposed teeth. Parasaurolophus is a lambeosaur (crested) hadrosaur or "duck-bill" from the Judith River Formation in Montana. The maxilla possessed 100s teeth that were in rows of teeth which acted as conveyor belt to maintain a chewing surface to cut and grind their food. Bone quality is excellent. Minor crack fill. No restoration. Legally collected on private land in the Judith River Fm., Fergus Co., Mpntana. An excellent collector's quality Edmontosaurus maxilla section from a rare location.  Authenticity guaranteed. The maxila comes with a sturdy custom display stand. A fantastic and rare display piece!

DH30        SIZE: 11-1/2" length x  4-1/4" height  (8" height on stand)   

Note - Adding 22 Hadrosaur /Edmontosaurus bones & claws in April 2022.     Link to Edmontosaurus fossils catalog

An Ultra Rare, TOP QUALITY Spicomellus afer spike osteoderm from the earliest known Ankylosaur found in the Boulemane region of Morocco. An October Fossil of the Month.  An excellent spike with an incredible natural red color and patina. The surface quality is exceptional with no pitting, nicks or wear! Fully inflated. Simple crack fill. No restoration. An exceptional quality, collector's spke. Authenticity guaranteed. Spicomellus afer specimens are quite rare and only a few have been found. This is what a real Spicomellus afer spike looks like.  Jurassic age (Bathonian) - 166 MYA. Found in the El Mers Group (formation), Boulahfa, So. of Boulemane, Fes Meknas, Morocco.

M1302c      Size: 3-5/16"   ;  1-1/8" width

An Ultra Rare, TOP QUALITY Spicomellus afer spike osteoderm from the earliest known Ankylosaur found in the Boulemane region of Morocco. An October Fossil of the Month.  An excellent spike with an incredible natural black color and patina. The surface quality is exceptional with no pitting, nicks or wear! Fully inflated. Simple crack fill. No restoration. An exceptional quality, collector's spke. Authenticity guaranteed. Spicomellus afer specimens are quite rare and only a few have been found. This is what a real Spicomellus afer spike looks like.  Jurassic age (Bathonian) - 166 MYA. Found in the El Mers Group (formation), Boulahfa, So. of Boulemane, Fes Meknas, Morocco.

M1301c      Size: 3-5/16"   ;  1-1/8" width  ;  Base width: 3-1/8"

A rare, TOP QUALITY Megatherium americanum sloth claw from an extinct genus of giant ground sloths from the Pampean region, Uruguay. A March Fossil of the Month. Megatherium is from the family of the largest Ground sloths. This claw has excellent preservation. It is complete down to an excellent tip with essentially no restoration or repair. There appears to be a 1.5” area of the top of the sheath rim on the back side that may have minor restoration (see photo - a small area). Excellent preservation of the proximal end. An incredible massive Late Pliocene - Early Pleistocene display piece from Uruguay. Authenticity guaranteed. A fantastic Pleistocene giant ground sloth claw specimen. A rare Museum Quality specimen from a rare site. One of my favorites! Comes with a steel stand. 

X701          SIZE: 11-1/2" x 5-1/4" x 2-5/8"   Height with stand:  6.75"

Note – adding 14 Ground Sloth claws & teeth in March 2022.   Link to Sloth fossils

An ULTRA RARE, Top Quality 5-7/8" Tyrannosaurus rex tooth with root. This crown measures 2-1/4" and is root thick (1-1/2"). The crown and root enamel has very good color and patina. Serrations are worn and there is some enamel peel. Tip end is worn round which is very typical with adult Rex teeth. Several cracks in the crown were filled and stabilized. The root has no hydration cracks - incredible quality. You will not find a better quality root! A top quality, massive Rex tooth from an adult T. Rex. T-Rex was the apex during the late Cretaceous with massive teeth capable of crushing its prey. See the detailed description to determine how to tell a real T-Rex tooth! Legally collected on private land in the Hell Creek Fm., Garfield Co., Montana. Authenticity guaranteed. You will rarely see an adult rooted Rex tooth!  Note - Riker frame included.

DT02  BoP        SIZE: 5-7/8"   (1-1/2" W)

A Top Quality Tyrannosaurus rex Premaxillary (front) tooth from a big T. Rex. An October 2020 Fossil of the Month. This Rex crown measures 2-1/4" (straight line) and 1" thick. The enamel is the highest quality with no root etchings. Great dark chocolate brown color. Excellent serrations serrations. The tip is excellent with a small natural wear facet. No cracks. No breaks. A 100% natural tooth! A fantastic Premax Rex tooth!  T-Rex was the apex during the late Cretaceous with massive teeth capable of crushing its prey. See the detailed description to determine how to tell a real T-Rex tooth! Legally collected on privately deeded land in the Hell Creek Fm., Carter River Co., Montana. Authenticity guaranteed.  Note - a Riker frame is included. This is a top quality collector's tooth. Museum quality.

DT02 BoP3         SIZE: 2-1/4"   (1" W x 3/4" H)

Note - Adding 3 T. rex teeth in October 2020.  Link to T. rex teeth --> T. rex teeth

An ultra rare Top Quality, Stegosaurus plate. A February Fossil of the Month. This Stegosaurus plate is good sized and measures 17-1/2" wide x 13" high. The bone quality is exceptional with a black color. Excellent overall condition. There is limited crack fill, but there is no restoration. This is a large and all natural specimen. Stegosaurus was an iconic quadruped herbivore recognized by these plates lining its neck, back and tail during the late Jurassic. Legally collected on private land in the Morrison Fm., Bone Cabin Quarry, Albany Co., Wyoming. Authenticity guaranteed. A very rare collector's specimen!  Note - This specimen has a custom steel display stand as shown. This specimen weighs 19 lbs. A supplemental shipping fee will be required for international orders.

STEG1     SIZE:  17-1/2" wide x 13" height (plate base is 2-1/2" thick)  ;  Height on display stand: 18"