Search results for: 'duck or altus my harp good book 12inch'

A rare, Top Quality Megalodon - upper jaw anterior tooth from West Java, Indonesia - new site. This Megalodon has an incredible tan color tooth with an excellent brown colored bourlette. Highest quality enamel. Excellent color! The bourlette is large and 98% complete. The serrations are razor sharp and near complete with an excellent tip serration. Very good serrations. The root is good with erosion on the rear which is common for these Megs. Miocene Age. No repair or restoration. Authenticity Guaranteed.  Note - This tooth comes with a custom display stand as shown in the final photo.

IN29        Size: 5-3/16"   (4-1/8" W)

Note - Adding 14 Top Quality Indonesian Megalodon Teeth in June 2022. -> Link To TQ Indonesian Megs

A beautifully prepared, TOP QUALITY Walliserops lindoei trilobite, the "short trident Comura".  One of the collector's favorite spiny trilobites. A November Fossil of the Month. Walliserops lindoei is an unusual looking species with three rows of spines run down its back and a trident-like fork extending from the front of the cephalon. The preparation is German with all original colors and no restoration. Exceptional completeness and preservation. Great natural black shell with excellent luster.  A very difficult species to prepare. Excellent shell and spine preservation. Excellent compound eyes. Good size. A scarce species! One of the ultimate Middle Devonian (380 mya) spiny trilobite from the Foum Zguid, Morocco. Authenticity guaranteed. One of my favorite spiny trilobites!  Museum Quality. Note - specimen weights 1.7 lbs. International orders may require supplemental postage added to Free Shipping. Please inquire.  

XM75          Size: 1-7/8"   (1")

Adding 9 top quality Moroccan trilobites in November 2025.     Link to Moroccan trilobites.

A very rare, Parotodus benedeni  tooth from the Newberry, So. Carolina. An Oligocene age tooth from the Ashley Marl. Top quality enamel and very clean & sharp edges and a sharp tip! Wide crown shape. Root is complete, nicely articulated, and thick. No repair or restoration. Authenticity guaranteed. This is as good as they get! One of my best Oligocene P. benedeni teeth!

SC872        SIZE: 1-5/8" 

Adding 15 So. Caroilna Parotodus benedeni teeth in May 2025.  ->   Link to SC Parotodus benedeni teeth.

A Top Quality Edmontosaurus annectens ulna bone (lower front leg or "arm" bone) from the late Cretaceous of North America. Edmontosaurus is a very large hadrosaur or "duck-bill" dinosaur found in the Hell Creek formation. They were mainly bipedal, but could walk on all four legs in search of food. This specimen is a excellent with some crack fill. Bone quality is excellent. No restoration. Legally collected on private land in the Hell Creek Fm., Garfield Co., Montana. An excellent collector's quality Edmontosaurus ulna bone.  Authenticity guaranteed. An ulna bone from an adult Edmontosaurus. Note - This items weighs 3.3 pounds and an international shipping surcharge will be applied to the "free shipping" offer.

DH37        SIZE: 18"  x  3"  x  2-5/8"    

Note - Adding 21 Edmontosaurus bones in August 2023.       Link to Edmontosaurus fossils catalog

A Top Quality Hadrosaur maxilla (upper jaw) section from the late Cretaceous (Horseshoe Canyon Fm.) of North America. This jaw section contains 10 exposed teeth. This hadrosaur or "duck-bill" dinosaur was found in the Horseshoe Canyon Formation in Alberta. The maxilla possessed 100s teeth that were in rows of teeth which acted as conveyor belt to maintain a chewing surface to cut and grind their food. This specimen is a section of the lower jaw includes ten rows of teeth. Bone quality is excellent. No restoration. Legally collected on private land in the Horseshoe Canyon Fm., Alberta, Canada. An excellent collector's quality Edmontosaurus maxilla section from a rare location.  Authenticity guaranteed. Disposition number #000028-0000029. 

DH33        SIZE: 4"  x  3-1/2"    

Note - Adding 22 Hadrosaur /Edmontosaurus bones & claws in April 2022.     Link to Edmontosaurus fossils catalog

A Top Quality Edmontosaurus annectens tail (cervical) vertebra from the late Cretaceous of North America. A May Fossil of the Month. Edmontosaurus is a very large hadrosaur or "duck-bill" dinosaur found in the Hell Creek formation. This cervical vertebra is 100% complete without restoration - rare!  Bone quality is excellent. Processes are intact. No cracks. No repair or restoration. Legally collected on private land in the Hell Creek Fm., Carter Co., Montana. An exceptional collector's quality Edmontosaurus vertebra. Authenticity guaranteed. This vertebra comes with a custom steel stand as in the photos. Weighs 3.5 lbs. International customers will need to pay a shipping suplement.

DH53        SIZE: 6-3/4" (height) x 6-3/4" (wide) & 2-3/4" (length)  Height on stand = 9".

Note - Adding 21 Edmontosaurus bones / claws in May 2025.       Link to Edmontosaurus fossils catalog

A rare, Top Quality Edmontosaurus annectens finger from the late Cretaceous of North America. Edmontosaurus is a very large hadrosaur or "duck-bill" dinosaur found in the Hell Creek formation. The finger includes two carpals and a manus claw. Edmontosaurus was mainly bipedal, but could walk on all four legs in search of food. As noted by the front leg size difference, Edmontosaurus could put little weight on them. Excellent bone quality. Minor crack fill. No restoration. Legally collected on private land in the Hell Creek Fm., Harding Co., So. Dakota. An excellent collector's quality Edmontosaurus finger.  Authenticity guaranteed.  Note - Edmontosaurus carpal bones and unguals are very scarce. I rarely see them. T. rex must have eaten them...

DH46        SIZE: 6-5/8" (length)  2" (width)

Note - Adding 21Edmontosaurus bones / claws in May 2025.       Link to Edmontosaurus fossils catalog

A TOP QUALITY,  LARGE rare Araucaria mirabilis pine cone cut and polished specimen from Argentina. These Jurassic pine cones are exquisite and known for their highy quality and extreme preservation. This cone is large and shows both great interior and exterior detail.The internal detail is exceptional. One of my finest cut and  polished pine cone specimen in stock and I will not be getting any more as exports have stopped.  Authenticity guaranteed. 

 X308  BoP    Size: 2-1/2" x 2-1/8"

Note - Adding 14 new pine cone specimens in December 2017.      Link to Pine Cone fossils.

A TOP QUALITY rare Araucaria mirabilis pine cone cut and polished specimen from Argentina. A June Fossil of the Month. These Jurassic pine cones are exquisite and known for their highy quality and extreme preservation. The internal and external detail are exceptional. Incredible vivid red, orange, charcoal, etc. colors. This specimen is one of my finest cut and polished pine cone specimen in stock and I will not be getting any more as exports have stopped! An incredible cut and polished pine cone specimen. Authenticity guaranteed. Note - new specimen export has stopped for more than 10 years! This is an old collection piece. Best colors and detail.

X310     Size: 2-1/2" x 2-3/16"

Note - Adding 5 rare Argentine pine cone specimens in June 2025.      Link to Pine Cone fossils.

A LARGE, Top Quality Edmontosaurus annectens toe from the late Cretaceous of North America. Edmontosaurus is a very large hadrosaur or "duck-bill" dinosaur found in the Hell Creek formation. This is a non-associated set of toe bones from the outer toe (toe IV - see diagram), and it consists of four four toe bones (Phalanx 1 thru 4) and a pes hoof core (ungual). Bone quality is excellent with minor crack fill on Phalanx 1 & 2 only. Other pieces are perfect including an exceptional pes ungual. No restoration. Legally collected on private land in the Hell Creek Fm., Carter & Garfield Co., Montana. An exceptional collector's quality Edmontosaurus toe.  Authenticity guaranteed.

DH41 BoP    SIZE: 12-1/4" (combined length) ; Phalanx #1 3-7/8" x 5" ; Pes Ungual 3-3/4" x 3-1/2"

Note - Adding 4 Edmontosaurus toes / claws in August 2020.       Link to Edmontosaurus fossils catalog

A Top Quality Edmontosaurus annectens ulna bone (lower front leg or "arm" bone) from the late Cretaceous of North America. An August Fossil of the Month. Edmontosaurus is a very large hadrosaur or "duck-bill" dinosaur found in the Hell Creek formation. They were mainly bipedal, but could walk on all four legs in search of food. This specimen is a excellent with no breaks and only minor crack fill. Bone quality is excellent. No restoration. Legally collected on private land in the Hell Creek Fm., Harding Co., So. Dakota. An excellent collector's quality Edmontosaurus ulna bone.  Authenticity guaranteed. An extra large ulna bone from an adult Edmontosaurus. Note - This items weighs 6.5 pounds and shipping surcharge will be applied to the "free shipping" offer.

DH71        SIZE: 24-1/4"  x  5"  x  3"    

Note - Adding 14 Edmontosaurus bones in August 2021.       Link to Edmontosaurus fossils catalog

A very rare, Parotodus benedeni  tooth from the Wando River, So. Carolina. An Oligocene age tooth from the Ashley Marl. Top quality enamel and very clean & sharp edges and a sharp tip! Wide crown shape. Root is complete, nicely articulated, and thick. No repair or restoration. Authenticity guaranteed. This is as good as they get! One of my best Oligocene P. benedeni teeth!

SC877        SIZE: 1-3/8" 

Adding 15 So. Caroilna Parotodus benedeni teeth in May 2025.  ->   Link to SC Parotodus benedeni teeth.