Search results for: 'golden good sizes'

A Top Quality Edmontosaurus annectens tail (cervical) vertebra from the late Cretaceous of North America. A May Fossil of the Month. Edmontosaurus is a very large hadrosaur or "duck-bill" dinosaur found in the Hell Creek formation. This cervical vertebra is 100% complete without restoration - rare!  Bone quality is excellent. Processes are intact. No cracks. No repair or restoration. Legally collected on private land in the Hell Creek Fm., Carter Co., Montana. An exceptional collector's quality Edmontosaurus vertebra. Authenticity guaranteed. This vertebra comes with a custom steel stand as in the photos. Weighs 3.5 lbs. International customers will need to pay a shipping suplement.

DH53        SIZE: 6-3/4" (height) x 6-3/4" (wide) & 2-3/4" (length)  Height on stand = 9".

Note - Adding 21 Edmontosaurus bones / claws in May 2025.       Link to Edmontosaurus fossils catalog

An EXTRA LARGE Ultra Rare, Top Quality Pachychephalosaurus wyomingensis premaxillary tooth from the late Cretaceous of northern North America. A February Fossil of the month. This tooth is often referred to as the Pachy "Fang". There are posterior serrations present on this tooth. There is also a small wear facet on the tooth (quite common). Pachychephalosaurus is the dinosaur which is famous for its large domed head surrounded by spikes. The enamel is excellent quality with great color and patina. No cracks or restoration. An ultra rare Pachy premax tooth!  Legally collected on private land in the Hell Creek Fm., Powder River Co., Montana. An excellent collector's quality Pachychephalosaurus premaxillary tooth. Note - tooth comes with the gem case pictured. Authenticity guaranteed. My largest Pachy premaxillary tooth!

DP01       SIZE: 5/8"    

Note - Adding 6 new Pachy spikes / teeth in February 2025..   Link to Pachy fossils catalog

A LARGE, Top Quality Edmontosaurus annectens toe from the late Cretaceous of North America. Edmontosaurus is a very large hadrosaur or "duck-bill" dinosaur found in the Hell Creek formation. This is a non-associated set of toe bones from the outer toe (toe IV - see diagram), and it consists of four four toe bones (Phalanx 1 thru 4) and a pes hoof core (ungual). Bone quality is excellent with minor crack fill on Phalanx 1 & 2 only. Other pieces are perfect including an exceptional pes ungual. No restoration. Legally collected on private land in the Hell Creek Fm., Carter & Garfield Co., Montana. An exceptional collector's quality Edmontosaurus toe.  Authenticity guaranteed.

DH41 BoP    SIZE: 12-1/4" (combined length) ; Phalanx #1 3-7/8" x 5" ; Pes Ungual 3-3/4" x 3-1/2"

Note - Adding 4 Edmontosaurus toes / claws in August 2020.       Link to Edmontosaurus fossils catalog

A Top Quality Edmontosaurus annectens lower jaw section from the late Cretaceous of North America. An August Fossil of the Month. Edmontosaurus is a very large hadrosaur or "duck-bill" dinosaur found in the Hell Creek formation. They possessed ~300 teeth that were in columns of five teeth each which acted as conveyor belt to maintain a large chewing surface to cut and grind their food. This specimen is a large section of the lower jaw showing at least 20 teeth still in place. Bone quality is excellent with no cracks. No restoration. Legally collected on private land in the Hell Creek Fm., Powder River Co., Montana. A exceptional specimen from one of my favorite localities. An exceptional collector's quality Edmontosaurus jaw section.  Authenticity guaranteed.

DH31 BoP       SIZE: 4-1/4" x 2-5/8"    

Note - Adding 6 Edmontosaurus jaw sections in August 2020.       Link to Edmontosaurus fossils catalog

A Top Quality Edmontosaurus annectens ulna bone (lower front leg or "arm" bone) from the late Cretaceous of North America. An August Fossil of the Month. Edmontosaurus is a very large hadrosaur or "duck-bill" dinosaur found in the Hell Creek formation. They were mainly bipedal, but could walk on all four legs in search of food. This specimen is a excellent with no breaks and only minor crack fill. Bone quality is excellent. No restoration. Legally collected on private land in the Hell Creek Fm., Harding Co., So. Dakota. An excellent collector's quality Edmontosaurus ulna bone.  Authenticity guaranteed. An extra large ulna bone from an adult Edmontosaurus. Note - This items weighs 6.5 pounds and shipping surcharge will be applied to the "free shipping" offer.

DH71        SIZE: 24-1/4"  x  5"  x  3"    

Note - Adding 14 Edmontosaurus bones in August 2021.       Link to Edmontosaurus fossils catalog

A rare EXTRA LARGE, Top Quality Edmontosaurus annectens hoof core (toe or pes ungual) from the late Cretaceous of North America. An August Fossil of the Month. Edmontosaurus is a very large hadrosaur or "duck-bill" dinosaur found in the Hell Creek formation. This is a toe hoof core from a massive Edmontosaurus. It is from the center toe - toe III. The largest one that I have seen! The Edmontosaurus was bipedal and had much larger feet relative to hands. Bone quality is excellent. No repair or restoration. Legally collected on private land in the Hell Creek Fm., Dawson Co. Montana. A rare collector's quality Edmontosaurus pes hoof core.  Authenticity guaranteed. These extra large hoof cores are always extremely difficult to find! Weighs more than 1.5 pounds.

DH42 BoP       SIZE: 4-3/4" x  5-1/2"  (wide)  &  2-3/8" (thick)

Note - Adding 7 Edmontosaurus toe bones / claws in August 2021.       Link to Edmontosaurus fossils catalog

A Top Quality Lambeosaur (Parasaurolophus) maxilla from the late Cretaceous (Judith River Fm.) of North America. An April Fossil of the Month. This is a complete upper jaw containing 100s exposed teeth. Parasaurolophus is a lambeosaur (crested) hadrosaur or "duck-bill" from the Judith River Formation in Montana. The maxilla possessed 100s teeth that were in rows of teeth which acted as conveyor belt to maintain a chewing surface to cut and grind their food. Bone quality is excellent. Minor crack fill. No restoration. Legally collected on private land in the Judith River Fm., Fergus Co., Mpntana. An excellent collector's quality Edmontosaurus maxilla section from a rare location.  Authenticity guaranteed. The maxila comes with a sturdy custom display stand. A fantastic and rare display piece!

DH30        SIZE: 11-1/2" length x  4-1/4" height  (8" height on stand)   

Note - Adding 22 Hadrosaur /Edmontosaurus bones & claws in April 2022.     Link to Edmontosaurus fossils catalog

A rare Top Quality, Allosaurus fragilis  tooth. This Allosaurus crown measures 1-9/16". The enamel is high quality. Great rich dark brown color. Very good serrations. Minor crack fill. Very good overall condition. No repair or restoration. Allosaurus was the apex predator during the late Jurassic with large teeth designed to slash predators. Legally collected on private land in the Morrison Fm., Bone Cabin Quarry, Como Bluff, Wyoming. Authenticity guaranteed.  Note - A gem case will be included.

DL07         SIZE: 1-9/16"   

Note - Adding 8 Allosaurus fossils in January 2023    Link to Allosaurus teeth

A Top Quality Edmontosaurus annectens tail (caudal) vertebra from the late Cretaceous of North America. Edmontosaurus is a very large hadrosaur or "duck-bill" dinosaur found in the Hell Creek formation. Bone quality is excellent. No cracks. No repair or restoration. Legally collected on private land in the Hell Creek Fm., Carter Co., Montana. An excellent collector's quality Edmontosaurus vertebra.  Authenticity guaranteed. 

DH64        1-5/16" (centrum wide) & 15/16" (length)

Note - Adding 22 Edmontosaurus bones / claws in April 2024.       Link to Edmontosaurus fossils catalog

A Top Quality Edmontosaurus annectens tail (caudal) vertebra from the late Cretaceous of North America. Edmontosaurus is a very large hadrosaur or "duck-bill" dinosaur found in the Hell Creek formation. Bone quality is excellent. Partial process is intact. No cracks. No repair or restoration. Legally collected on private land in the Hell Creek Fm., Carter Co., Montana. An excellent collector's quality Edmontosaurus vertebra.  Authenticity guaranteed. 

DH62        1-1/2" (centrum wide) & 1-1/8" (length)

Note - Adding 22 Edmontosaurus bones / claws in April 2024.       Link to Edmontosaurus fossils catalog

A Top Quality Edmontosaurus annectens tail (caudal) vertebra from the late Cretaceous of North America. Edmontosaurus is a very large hadrosaur or "duck-bill" dinosaur found in the Hell Creek formation. Bone quality is excellent. Partial process is intact. No cracks. No repair or restoration. Legally collected on private land in the Hell Creek Fm., Carter Co., Montana. An excellent collector's quality Edmontosaurus vertebra.  Authenticity guaranteed. 

DH60       2-3/8" (height)  2-1/8" (centrum wide) & 1-7/8" (length)

Note - Adding 22 Edmontosaurus bones / claws in April 2024.       Link to Edmontosaurus fossils catalog

High quality Riker type display frames. Good size for Megalodon teeth. Made in the USA. Dimensions (L x W x D) (Inches)

DD05           Size: 6 x 8 x 2